Product Reviews

SmallRig Super Clamp Review: A Compact Mounting Point for Camera Rigs

A compact clamp for photographers and video makers who need to attach compatible accessories to narrow bars, shelves, or other mounting points.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Super Clamp is a compact way to add a mounting point for a camera or other compatible gear on a suitable bar, shelf, or similar surface.

This SmallRig Super Clamp review looks at its adjustable jaw, threaded attachment points, and the setup limits to consider before building it into a rig.

SmallRig Super Clamp Review Summary

The quick verdict

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A compact clamp for photographers and video makers who need to attach compatible accessories to narrow bars, shelves, or other mounting points.

  • Adjustable jaw opens from a minimum of 15 mm to a maximum of about 40 mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
  • Designed for mounting on surfaces such as hooks, shelves, plate glass, and crossbars, depending on their thickness and shape.
  • Constructed from aluminum alloy and stainless steel.

Pros

  • The 15–40 mm jaw range accommodates a variety of appropriately sized mounting surfaces.
  • Multiple thread sizes give builders options when connecting compatible rig hardware.

Consider before buying

  • The jaw range rules out surfaces thinner than 15 mm or thicker than 40 mm; measure the intended mounting point first.
  • Only the clamp is included, so a separate arm, ball head, or adapter may be needed to position an accessory.
Read the full review summary

This clamp combines a 15–40 mm jaw range with 1/4-inch and 3/8-inch threaded holes, giving camera-rig builders several ways to position accessories around a set.

Its aluminum-alloy and stainless-steel construction keeps the unit compact at 0.13 kg, while rubber pads are intended to protect the clamped surface and help resist slipping.

It suits buyers who need a small, adaptable anchor point and already know the dimensions and attachment needs of their setup.

The clamp alone is the package, so any ball head, articulating arm, or other fitting needed between it and an accessory must be accounted for separately.

The buying factors

SmallRig Super Clamp Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Jaw-range flexibility

The 15–40 mm opening covers a useful range of bars and edges, provided the clamped surface falls within those limits.

8/10

Accessory mounting options

Both 1/4-inch and 3/8-inch threaded holes allow more than one attachment standard.

8/10

Rig versatility

The clamp is designed for varied mounting surfaces and accessory setups, though final compatibility depends on the connecting hardware.

8/10

Portability

At 0.13 kg and described as compact, it should be straightforward to keep with a camera-support kit.

7/10

Surface contact protection

Rubber pads are provided to help protect contact surfaces and reduce slipping; careful placement still matters.

5/10

Ready-to-use completeness

The package includes one clamp, so buyers needing an arm or head to position their gear should plan for that separately.

Key Features and Specifications of SmallRig Super Clamp

  • Adjustable jaw opens from a minimum of 15 mm to a maximum of about 40 mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
  • Designed for mounting on surfaces such as hooks, shelves, plate glass, and crossbars, depending on their thickness and shape.
  • Constructed from aluminum alloy and stainless steel.
  • Rubber pads at the clamp contact points are intended to help prevent slipping and scratching.
  • Compact, 0.13 kg clamp supplied as a single item.

Pros and Cons of SmallRig Super Clamp

Pros

  • The 15–40 mm jaw range accommodates a variety of appropriately sized mounting surfaces.
  • Multiple thread sizes give builders options when connecting compatible rig hardware.
  • Rubber contact pads can help protect finished surfaces and improve grip at the clamp.
  • Its compact form and 0.13 kg weight make it easy to include in a portable kit.

Consider before buying

  • The jaw range rules out surfaces thinner than 15 mm or thicker than 40 mm; measure the intended mounting point first.
  • Only the clamp is included, so a separate arm, ball head, or adapter may be needed to position an accessory.
  • The setup depends on compatible threaded fittings and a suitable surface; check both before relying on the mount.

Who Should Buy SmallRig Super Clamp?

Good fit

Consider the SmallRig Super Clamp if you want to add a mounting point to a bar, shelf edge, or another firm surface that measures between 15 and 40 mm.

Its 1/4-inch and 3/8-inch threaded holes give you options for connecting rig accessories, and the padded jaws address the two practical concerns of surface contact: marking and slippage.

It can be a useful building block for a compact camera or lighting setup when you already have the hardware needed to join the clamp to your accessory.

Before buying, measure the exact contact area and confirm the thread standard on the part you plan to attach. Remember that this package contains the clamp only.

Who should skip it

Skip it if your intended surface is outside the stated 15–40 mm jaw range or has a shape that prevents the jaws from seating evenly. A different mounting approach may fit that setup better.

Look elsewhere if you need a complete articulated support in one package. This is a clamp with threaded holes, so factor in any connecting arm or head your rig requires.

How the SmallRig Super Clamp Fits a Camera Rig

Check the mounting surface first

The jaw range is the key compatibility check: the surface needs to fall between 15 mm and about 40 mm thick.

Measure the exact spot where the clamp will sit, and consider whether the jaws can meet it evenly. A surface near the limits may leave less room for adjustment, so avoid assuming that a nearby measurement will fit.

Plan the connection between clamp and gear

The 1/4-inch and 3/8-inch threaded holes provide attachment points, but the accessory still needs a matching connection or an adapter.

Sketching the connection from clamp to accessory before ordering can reveal whether the setup needs an additional ball head, arm, or fitting. That planning matters especially when the desired angle cannot be achieved by attaching the accessory directly.

Think about contact and placement

Rubber pads are intended to help keep the clamp from slipping and scratching the surface.

For a tidy setup, position the jaws on a stable section with broad, even contact, then make sure the camera or accessory clears nearby controls and obstacles.

The pads are a useful design detail, but they do not replace checking that the clamped surface and assembled rig suit the intended use.

Understand what the package covers

The single-item package keeps the basic purchase simple, but it is not an all-in-one articulating support.

Buyers who already own compatible connecting hardware can use the clamp as an anchor point; those starting from scratch should include the cost and compatibility of additional fittings in their decision.

Alternatives to SmallRig Super Clamp

Camera Mounts & Clamps alternative

SmallRig Double Ball Head Super Clamp Mount
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Super Clamp Mount

Choose the main clamp if you want a compact anchor point and already have the connecting hardware. Consider this double-ball-head version if an integrated articulating connection and included action-camera adapter better match your setup.

  • This SmallRig model includes a super clamp, a double-ball-head mount, and an action-camera adapter, with a listed maximum weight capacity of 1.5 kg.
  • The SmallRig Super Clamp is a compact clamp with 1/4-inch and 3/8-inch threaded holes; the package contains one clamp.

Camera Mounts & Clamps alternative

SmallRig 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 9.8-Inch Magic Arm Clamp Kit

The main clamp may suit a more compact build when you can supply your own connection. The kit is a better fit when you want a longer adjustable arm included and need its wider stated maximum jaw opening.

  • This kit combines a super clamp with a 9.8-inch articulating arm, uses 1/4-inch screws at the arm ends, and has a jaw opening range of 15–54 mm.
  • The SmallRig Super Clamp provides threaded mounting holes but does not include an articulating arm.

Is SmallRig Super Clamp Worth It?

The SmallRig Super Clamp is worth considering as a compact, adaptable anchor point for a camera rig, especially if your intended surface measures within its 15–40 mm jaw range and your accessories match its threaded holes.

The padded jaws and light construction support a practical, portable setup.

Buy it when a clamp alone fits your plan and you have accounted for any required arm, head, or adapter.

If you need angle adjustment or a more complete mounting assembly out of the box, choose a kit that includes those parts.

Your review at a glance

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A compact clamp for photographers and video makers who need to attach compatible accessories to narrow bars, shelves, or other mounting points.

  • Adjustable jaw opens from a minimum of 15 mm to a maximum of about 40 mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
  • Designed for mounting on surfaces such as hooks, shelves, plate glass, and crossbars, depending on their thickness and shape.
  • Constructed from aluminum alloy and stainless steel.

Written by

centralcoastvietnam.com Editorial Team

Editorial team

Independent editorial coverage of central vietnam travel.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Super Clamp

SmallRig Super Clamp

A compact clamp for photographers and video makers who need to attach compatible accessories to narrow bars, shelves, or other mounting points.

  • Adjustable jaw opens from a minimum of 15 mm to a maximum of about 40 mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
Check Video Reviews on Amazon